HL-05-ATWL-LS
光學影像、渦電流探傷組合篩選機
Combined screening machine of optical image and vortex current flaw detection
裂紋檢測精度：深度＞0.1mm 寬度0.06mm
Crack detection accuracy: depth＞0.1mm width 0.06mm
參數規格
Specifications
本機臺外觀尺寸(長*寬*高)：
約2000mm*1200mm*2300mm
機臺重量：約850KG
更換規格：約30分鐘
檢測范圍：
長度:10-60mm 直徑：10-30mm
速度最快可達20支/分鐘
裂紋檢測精度：深度＞0.1mm 寬度0.06mm
電源：交流單項220V 50HZ
功率：約3KW
Product Size(L x W x H):
About 2000mm*1200mm*2300mm
Machine weight: about 850KG
Replacement specifications: about 30 min
examination range:
Length: 10-60mm Diameter: 10-30mm
The fastest speed:20 pcs / min
Crack detection accuracy: depth >0.1mm width 0.06mm
Power: AC single 220V 50HZ
Power: about 3KW
可檢測項目
Suitable for
表面劃傷、淬火開裂檢測(渦流檢測)
○螺紋直徑公差檢測；○最大/最小對邊公差檢測；
○螺紋牙底徑檢測；○螺紋牙中徑檢測；○牙距檢測；
○有無螺紋檢測；○斜牙檢測；○粗細牙檢測；
○頭部有無電鍍檢測；○頭部真圓度測量；○內孔直徑公差；
○搓牙有無到位檢測；○各部位臺階公差檢測；
○頭部厚度公差檢測；○總長度公差檢測；○側面開裂檢測；
Surface scratch and quenching cracking detection (Eddy current detection)
○Thread diameter tolerance detection;○ Maximum / minimum alignment tolerance detection;
○Threaded teeth bottom diameter detection;○ Thread middle diameter detection; Distance detection between teeth;
○Thread or not; ○Oblique teeth detection; ○Teeth thickness detection;
○Electroplating on head or not;○ Head roundness measurement; ○Diameter tolerance of inner hole;
○Detection for rub teeth in place or not;○ Step tolerance detection of each part;
○Head thickness tolerance detection;
○ Total length tolerance detection; Side cracking detection;
本設備用于檢測高端螺栓外觀尺寸、渦流表面探傷組合篩選機。
本機采用德國原裝進口Ibg渦流主機
This equipment is used to detect the appearance size of high-end bolt, vortex surface flaw detection combination screening machine.
This machine adopts imported Ibg eddy current main engine from Germany.
