※ 發明專利產品
HL-05-GS20
懸掛式鋼絲型光學影像篩選機
Optical image screening machine for hanging steel wire
參數規格Specifications
機臺外觀尺寸(長*寬*高)：
約2000mm*1000mm*2200mm
機臺重量：約450KG
更換規格：約5分鐘
檢測范圍：
長度:5-30MM
直徑：1.5-5mm
可裝3支CCD
速度最快可達1000支/分鐘
電源：交流單項220V 50HZ
功率：約3KW
Size of machine (L x W x H):
About 2000mm*1000mm*2200mm
Machine weight: about 450KG
Replacement specifications: about 5 minutes
examination range:
Length: 5-30MM
Diameter: 1.5-5mm
Can carry 3 CCD
The fastest speed：1000 / min
Power: AC single 220V 50HZ
Power: about 3KW
可檢測項目Suitable for
○螺紋直徑公差檢測；○頭部最大/最小對邊公差檢測；
○最大/最小對角公差檢測；○螺紋牙中徑檢測；
○內孔與外圓同心度檢測；○牙距檢測；○有無螺紋檢測；
○頭部有無電鍍檢測；○斜牙檢測；
○頭部表面開裂（有油件、黑色、側面開裂除外）；
○粗細牙檢測；○頭部針孔堵塞檢測；○尾端尖銳度檢測；
○牙數檢測；○頭部真圓度測量；○有無十字針孔 ；
○各部位臺階公差檢測；○頭部厚度公差檢測；○Thread diameter tolerance detection; ○Maximum/minimum alignment tolerance detection on head ;
○Maximum/minimum diagonal tolerance detection; ○Thread middle diameter detection;
○Concentricity detection of inner hole and outer circle; ○Distance detection of teeth; Thread or not;○Electroplating on head or not; ○Oblique teeth detection;○Surface cracking on head (except for with oil parts, black, side cracking);
○Teeth thickness detection; ○Pinhole blockage detection on head;○ Sharpness detection of end;○Teeth number detection; ○Head roundness measurement;○ Cross pinholes or not;○Step tolerance detection of each part; ○Head thickness tolerance detection;
